Before
After
Exterior repaint, coastal two-story
Chalking sanded back, stucco hairline cracks filled, and elastomeric caulk at every window, door and joint before the first coat.
Real jobs, photographed on site — exteriors, interiors, cabinets, ceilings, lanais, decks and commercial spaces.
Not a brochure. The surfaces we actually prepped, coated and cleaned up after.
Everything below came off a WCS Prime Services job in Sarasota, Bradenton, Lakewood Ranch and the towns around them. No stock images, no paint-brochure shots, no rooms built on a computer. We do not publish the homeowner's name, the address or the community — you see the work, not the family.
The mix is what painting really looks like on this coast. Exteriors where salt air has chalked the finish to a powder and the west wall has opened into alligator cracking. Stucco hairline cracks that get filled and run with elastomeric caulk before a coat goes anywhere near them. Soffit and fascia that went soft before anyone looked up. Lanai ceilings and pool cage screens that need washing instead of paint. Tongue-and-groove pine and cedar. Kitchen cabinets in thermofoil, laminate, oak and maple. Ceilings where the knockdown or orange peel has to be matched so the patch disappears, and the occasional Level 5 wall where the afternoon light rakes across it and hides nothing.
Interior or exterior, each of these started the same way. Wendel came out, walked the home with the owner, measured, and left a written estimate with a fixed price. He is on every job. The same two people who start it finish it, and the space gets cleaned up at the end of each day. If you see the kind of work you need, call or text (941) 263-0912 and we will come measure yours.
Drag the handle across any card: one frame before we started, one from the same spot after we were done.
The label under each card tells you the type of work, the surface it went on, and the part of the process that decided how it came out — because on a repaint, prep is what you are actually buying. We do not name the homeowner, the street or the neighborhood on any of these.
Before
After
Chalking sanded back, stucco hairline cracks filled, and elastomeric caulk at every window, door and joint before the first coat.
Before
After
Failing paint scraped and feathered, bare spots spot-primed, then two finish coats on body and trim.
Before
After
A raw slab sanded to bare wood, then stained and sealed with a clear topcoat — an outdoor top under a lanai takes sun and rain like an exterior does.
Before
After
Sun-bleached cedar under a lanai, stripped and sanded, then brought back to a deep, even tone.
Before
After
Every door, drawer front and hinge numbered and removed, degreased, bonding primer, then HVLP finish coats.
Before
After
Damaged board replaced, taped, then floated and knocked down to match the texture already on the walls.
Before
After
Walls, ceilings, trim, doors and baseboards, with floors and furniture masked before anything was opened.
Before
After
The wall skimmed and sanded flat first, because a dark color shows every flaw a light color hides.
Before
After
Walls in a flat white and the ceiling grid sprayed out, scheduled after hours so the floor stayed open.
Not every job gets photographed twice. These three are one frame each, and we would rather label them than pretend.
French doors stripped, masked and sprayed to a smooth satin, with no brush marks left in the panels.
Concrete degreased, cracks repaired, then a textured, slip-resistant coating built for sun and pool chemicals.
Shot mid-job: low-pressure soft wash that lifts algae and mildew without cutting into the surface.
The photos are taken by us while we are standing on the job — phone in one hand, roller in the other. When a job has a before frame, it goes up before the drop cloths come out, and the after frame is shot from the same spot once the last piece of trim is dry. On the rest, you are seeing the work in progress — half the surface done, half of it still the way we found it.
We do not retouch color. A wall that looks warm in a photo is warm in the room, and the light in a Florida home moves a color further than any filter would. We do not shoot a half-finished room and call it done, and we do not fill a gallery about our work with somebody else's work or a manufacturer's brochure image.
We also leave out anything that would identify a home — the address, the family name, the community. That is why the captions describe the type of job and the surface instead of the street it sits on.
If a photo here matches what you have, point at it when we come out. Wendel will check the surface in person, because a thermofoil door, an oak door and a bare drywall ceiling each need a different primer, and the estimate has to say which one you are getting.

Every job in the gallery above began the same way. Wendel comes to your home, walks the surfaces with you, measures, and hands you a written estimate — the surfaces, the prep, the products, the number of coats and a fixed price, in writing, before anyone opens a can. The visit and the estimate cost you nothing.
We serve Sarasota, Bradenton, Lakewood Ranch, Palmetto, Parrish, Ellenton, Venice, North Port, Siesta Key and Longboat Key, and travel up to about 70 miles from Sarasota. Call or text (941) 263-0912, or email info@wcsprimeservices.com.
FREE ESTIMATE
We measure at your home and hand you the price in writing.
Step 1 of 3
What people ask about the photos on this page.
They are our own jobs, photographed on site in Sarasota, Manatee County and the towns around them. Nothing on this page is a stock image, a paint manufacturer's brochure shot, or another company's work. We also leave out the homeowner's name, the address and the community, so you see the work and not the family. If you want to see more photos of a job like yours, ask when we come out to measure, or call or text (941) 263-0912.
Usually yes, but the answer comes from your surfaces, not from the photo. Thermofoil cabinet doors need a different bonding primer than oak. A wall with alligator cracking needs different prep than one with stucco hairline cracks, and a knockdown ceiling has to be matched before it is painted or the patch will show. Point at the photo when Wendel comes out. He checks what you actually have, then writes the prep, the product and the number of coats into the estimate with a fixed price.
We are based in Sarasota, work across Manatee County, and travel up to about 70 miles — Bradenton, Lakewood Ranch, Palmetto, Parrish, Ellenton, Venice, North Port, Siesta Key and Longboat Key included. We will not point you to a street, because we do not publish addresses or homeowner names. What we can do is bring more photos of the same type of work to your free estimate visit. Call or text (941) 263-0912 or email info@wcsprimeservices.com.
Anything not answered here gets answered in person, at the estimate visit, with the surface in front of us.